Become a Stockist
JOIN OUR NETWORK - BECOME A STOCKIST FOR EVEREST PAINTS & SUMMIT SEAL Welcome to Everest Paints & Summit Seal Everest Paints and Summit Seal are at the forefront of...
Billyjoe Jarvis |
10% off across all of our products!
HIGH BUILD, INDUSTRIAL GRADE POLYURETHANE FLOOR PAINT
BENEFITS AND KEY FEATURES
PRODUCT DESCRIPTION
Everest Trade - Industrial Grade Concrete Floor Paint is a Premium single pack, hard-wearing, highly durable polyurethane resin-based floor paint, ideal for use in industrial areas such as warehouses, factories and industrial units due to its high build, high durability formula.
Available in an anti-slip variant which adds silica particles to provide a textured finish to improve grip and reduce the risk of slipping.
High durability against abrasion and impacts, provides better impact and abrasion resistance than the epoxy floor paints while also being much easier to apply.
It provides a tough petrol and oil resistant finish with excellent durability while also providing great tyre pluck properties good for areas with forklifts and work vehicles.
Ideal for use in large factories, industrial units, garages and on workshop floors.
MADE IN ENGLAND WITH PREMIUM RESINS.
This item is always in stock for all order sizes, fast delivery on any amount, important if you have a large area to cover.
SUITABLE SUBSTRATES
Can be used on standard concrete, metal and wood as well as most other porous substrates. Powerfloated and polished concrete floors must be ground using a floor grinder prior to application of the primer/sealer linked in the application section. Not recommended for use on self-levelling floors as they tend to be non-porous.
We recommend bare concrete floors are primed with 1 coat "Everest Trade polyurethane floor primer and sealer" to ensure good penetration and adhesion.
COLOURS AVAILABLE
Red, Blue, Black, White, Dark Grey, Grey, Light Grey, JCB Yellow, Magnolia and Green.
As well as any British standard or RAL colour for orders of 100 litres and over.
Click here for a colour chart.
SPREADING RATE (Coverage)
Approximately 5 - 7 square metres per litre, per coat. Coverage rates vary depending on surface area and porosity.
20 Litre tin = Approximately 60 M² with 2 coats.
5 Litre tin = Approximately 15 M² with 2 coats.
DRYING TIME
Under normal circumstances, it should be touch dry in 6-8 hours (at 15°c) if well ventilated and conditions are dry.
STORAGE PRECAUTIONS
Store away from heat and flames. Secure lid between uses to prevent paint hardening.
THINNERS
White Spirit or Turpentine Substitute can be used for thinning.
BATCH INFORMATION
We recommend ordering all the paint required in one order so you receive the same batch, Ordering on different dates will result in receiving different batches which may result in a shade difference.
This is fine if you are planning on using the different batches on different coats, However, it's not recommended to use on the same coat.
*only if the anti-slip option is selected.
Disclaimer: There is a small possibility that your order may be delivered in white tins with the product label applied. This is rare but can occur in times of increased demand due to the manufacturer running out of printed tins because of a large spike in sales. You can confirm this with the manufacturer.
PRODUCT TECHNICAL SPECIFICATIONS
Below are the technical specifications of this coating. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will be more than happy to provide you with the information needed.
Components: |
1 Part - Single Pack. |
Base Type: |
Polyurethane Resin - Solvent Based. |
Finish: |
Textured Gloss / Gloss Finish. |
Theoretical Coverage: |
Approximately 5 - 7 square metres per litre, per coat. |
Number of Coats: |
2 Coats Recommended.. |
Coating Thickness: |
50 Microns.. |
Suitable Substrates: |
Concrete, Concrete Floors, Metal, Wood, Stone, Existing well bonded paint, and Most porous surfaces.. |
Use Case (Interior / Exterior): |
Internal Only.. |
Touch Dry Time: |
6 - 8 Hours at 18°C |
Overcoatable: |
6 - 8 Hours at 18°C. |
Fully Cured: |
. |
Pot Life: |
. |
Primer Required?: |
We recommend priming bare, ground polished, ground powerfloated and brittle/loose floors with "Everest Trade polyurethane floor primer and sealer" prior to paint to ensure good penetration and adhesion... |
Colour Variation Count: |
Colour(s) Available. |
Application Method: |
Brush, Roller, H.V.L.P Sprayer - Non anti-slip only, and Airless Sprayer - Non anti-slip only.. |
Cleaner / Thinner: |
White Spirits and Standard Thinners. |
Shelf Life: |
24 Months if kept sealed and away from frost. |
Sizes Available: |
Available in Variants. |
DATA SHEETS AND PRODUCT FILES
Below are all the product data sheets and files we have on this coating. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will do their best to provide you with the information needed.
Files and Data Sheets
Coverage Calculator
This is our coverage calculator. Enter the size (m²) of the area you are looking to cover, then enter the number of coats you plan to apply, and it will inform you of the estimated quantity you will need based on the product's average coverage rates. If you require more information on this product, please email us at contact@everestpaints.com and one of our staff members will be more than happy to provide you with the information needed.
Coverage Calculator
Select Variant and Order
Excluding Tax
Ex Tax
Express Delivery Available!
Everest Trade - Industrial Concrete Floor Paint - High Build Polyurethane Resin Based - Anti-Slip - 20 Litre (4 x 5 Litre) / Dark Grey is backordered and will ship as soon as it is back in stock.
*subject to stock levels at the time of your order.